1TG2-1500-LRAT2


Compare

An all-in-one handheld tester for troubleshooting Ethernet and Wi-Fi networks and services and for validating path performance. The one-button AutoTest mimics the end-user experience and identifies the root cause of common problems in minutes, or proves that the network is not to blame. End-to-end wired and Wi-Fi performance tests validate SLA compliance and ensure infrastructure readiness for application delivery. Automated discovery reveals device location, key attributes, connection paths and problems. Dual copper and fiber optic ports simplify inline packet capture and VoIP monitoring. The companion cloud service facilitates long-term monitoring of network health, troubleshooting of intermittent problems and remote management. Includes the OneTouch AT 1TG2-1500 Ethernet Tester and the LinkRunner AT LRAT-2000 Network Auto-Tester as well all the following accessories: 1TG2-1500 Contents – 10/100/1000 Mbps copper/fiber test module, two 1G SX SFP fiber transceivers, SD card, frame carry strap, hand strap, AC adapter and line cord, USB flash drive, WireView #1-6, RJ45 patch cable and coupler, carrying case, getting started guide, and resource CD with users manual; LRAT-2000 Contents – LinkRunner AT 2000 tester with Li-ion battery, Wireview Cable ID #1, RJ-45 coupler, LinkRunner AT Manager software CD, USB cable, Getting Started Guide and soft case.

Category:

AIRCHECK-G2

GENERAL SPECIFICATIONS:

Dimensions 3.8 in x 7.7 in x 1.6 in (9.7 cm x 19.6 cm x 4.1 cm)

Weight 18 oz (0.51 kg)

Battery Rechargeable lithium-ion battery pack (3.6 V, 6 Ah, 21 Wh)

Battery life Typical operating life is 4.5 hours. Typical charge time is 7 hours

External AC adapter/charger AC input 85-264 Vac 47-63 Hz input power DC output 15 Vdc at 2 amps

Display 5.0 inch color LCD with capacitive touch screen (480 x 800 pixels)

Keypad 1-key elastomeric (power only)

Host interface 1x micro USB Type B port

Adjunct Interface 2x USB 2.0 Type A port

Wireless antenna 3x Internal

External antenna port Input only. Reverse-polarity SMA connector

ENVIRONMENTAL SPECIFICATIONS:

Operating temperature 32ºF to 113ºF (0ºC to +45ºC)

The battery will not charge if the internal temperature of the tester is above 122ºF (50ºC).

Operating relative humidity

(% RH without condensation) 90% (50ºF to 95ºF; 10ºC to 35ºC)

75% (95ºF to 113ºF; 35ºC to 45ºC)

Storage temperature -4ºF to 140ºF (-20ºC to +60ºC)

Shock and vibration 1 m drop test, Random, 3.8 grms, 5 Hz-500 Hz

Safety IEC 61010-1: Pollution degree 2

Altitude 4,000 m; Storage: 12,000 m

EMC IEC 61326-1: Basic Electromagnetic Environment; CISPR 11: Group 1, Class A

WIRELESS SPECIFICATIONS

Specification compliance IEEE 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac

Wi-Fi Connectivity 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac

Operating frequencies

These are the center frequencies of the channels that the AirCheck G2 tester supports. Frequencies of channels received:

The tester receives on all of the frequencies in every country. 2.4 GHz band: 2.412 – 2.484 GHz (channel 1 to channel 14) 5 GHz band: 5.170 – 5.320 GHz, 5.500 – 5.700 GHz, 5.745 – 5.825 GHz (channels 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 144, 149, 153, 157, 161, 165)

Frequencies of channels transmitted:

The tester transmits only on the frequencies allowed in the country where it is operating.

2.4 GHz band 802.11b: 2.412 – 2.484 GHz (channel 1 to channel 14)

802.11g/n 20 MHz BW (HT20): 2.412 – 2.472 GHz (channel 1 to channel 13)

802.11n 40 MHz BW (HT40): 2.422 – 2.462 GHz (includes all combinations of legal, bonded pairs of channels)

WI-FI ANTENNAS

Internal Wi-Fi antennas Three internal 2.4 GHz, 1.1 dBi peak, 5 GHz, 3.2 dBi peak antennas.

External directional antenna Antenna, frequency range 2.4 – 2.5 and 4.9 – 5.9 GHz.

Minimum gain 5.0 dBi peak in the 2.4 GHz band, and 7.0 dBi peak in the 5 GHz band.

External antenna connector[1] Reverse SMA

[1] External antenna port is receive-only (no transmit).

AIRCHECK MANAGER SOFTWARE

Supported operating systems Windows 7, Windows 8.1, Windows 10

Processor 400 MHz Pentium processor or equivalent (minimum); 1 GHz Pentium processor or equivalent (recommended) RAM 96 MB (minimum)

RAM 256 MB (minimum); 512 MB (recommended)

Hard disk Up to 500 MB of available space may be required

Display 1280 x 1024 high color, 32-bit (recommended)

Hardware USB Port

CERTIFICATIONS AND COMPLIANCE

Conformite Europeene. Conforms to the requirements of the European Union and the European Free Trade Association (EFTA).

The product complies with Australian standards.

Listed by Canadian Standards.

Complies with 47 CFR Part 15 requirements of the U.S. Federal Communications Commission.

Certified by the National Agency of Telecommunications (Anatel).

Conforms to relevant South Korean EMC Standards.

LINKRUNNER AT

GENERAL SPECIFICATIONS:

Media Access; Copper  RJ-45: 10BASE-T, 100BASE-TX, 1000BASE-T and PoE (IEEE 802.3af and 802.3at); 100BASE FX and 1000

Media Access; Fiber  SFP Adapter Port supports 100BASE-FX and 1000BASE-LX/ SX/ZX (LRAT-2000 Only)

Cable Tests  Pair lengths, opens, shorts, splits, crossed, straight through and cable ID

Power over Ethernet (PoE)  Single ended testing:

• User-defined testing to IEEE 802.3at class 0, 1, 2, 3, 4 without LLDP negation, or 4 with LLDP negotiation

• The following PSE PoE parameters are measured:

◦Pairs used

◦Received class

◦PSE type

◦ Unloaded voltage(V)

◦Loaded voltage (V) (LRAT-2000 with TruePower™)

◦Unloaded power (W) (LRAT-1000)

◦Loaded power (W) (LRAT-2000 with TruePower™)

Tone Generator  IntelliTone digital tone: [500 KHz]; analog tones: [400 Hz, 1 KHz]

Dimensions  3.5 in x 7.8 in x 1.9 in (8.9 cm x 19.8 cm x 4.8 cm)

Weight  18 oz (0.5 kg)

Battery  Removable, rechargeable lithium-ion battery pack (18.5 Watt-hrs) (included with introductory special)

Battery Life  Typical operating life is 6 hours; Typical charge time is 3 hours

External AC Adapter/Charger  AC input 90 to 264 Vac 48 to 62 Hz input power DC output 15 Vdc at 1.2 amps

Display  2.8 in color LCD (320 x 240 pixels)

Keypad  12-key elastomeric

LEDs  2 LEDs (Link and Receive/Transmit indicators)

Host Interface  USB 5-pin mini-B

ENVIRONMENTAL SPECIFICATIONS:

Operating Temperature and Relative Humidity 32ºF to 113ºF (0ºC to +45ºC) Note: The battery will not charge if the internal temperature of the tester is above 113ºF (45ºC)

Operating Relative Humidity (% RH without condensation)  90% (50ºF to 95ºF; 10ºC to 35ºC) 75% (95ºF to 113ºF; 35ºC to 45ºC)

Storage Temperature  -4ºF to 140ºF (-20ºC to +60ºC)

Shock and Vibration  Random, 2 g, 5 Hz-500 Hz (Class 2) 1 m drop

Safety  EN 61010-1 2nd edition

Safety (LR-AT 2000 only)  EN/IEC 60825-1:2007, EN/IEC 60825-2:2004+ A1:2007 (LRAT- 2000 only)

Altitude  4,000 m; Storage: 12,000 m

EMC  FCC Part 15 Class A, EN 61326-1

Certifications and Compliance  Conforms to relevant European Union directives Conforms to relevant Australian standards Listed by the Canadian Standards Association

LINRUNNER MANAGER SOFTWARE:

Supported Operating Systems  Windows® Vista, Windows® XP, Windows® 7, Windows® 8

Processor  400 MHz Pentium processor or equivalent (minimum); 1 GHz Pentium processor or equivalent (recommended)

RAM  96 MB (minimum); 256 MB (recommended)

Hard Disk  Up to 500 MB of available space may be required

Display  1024 x 768 high color, 32-bit (recommended)

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “1TG2-1500-LRAT2”

There are no reviews yet.